Leads and e-mailsPro

Leads & Emails keeps the e-mail addresses customers give you in the chat and follows up with automatic e-mails, before and after they buy.

Leads & Emails is a Pro feature. You’ll find it under AI Assistant → Automations → Leads & Emails, in four tabs: Leads, Email Sequence, Post-Purchase and Settings. The e-mail sequence and the post-purchase e-mails are two separate systems, each with its own switch. They share only the sender name and address.

How leads are captured

You don’t add leads by hand. A lead is created when a customer’s e-mail address reaches the plugin in one of these ways, shown in the Source column:

  • Chat Escalation: the customer asked for a person and submitted the contact form. See Agents and human takeover.
  • Flow Builder: the customer filled in the form of a Capture Email Action node in one of your flows. The lead also shows the name of the flow.
  • Logged-in Customer: a customer who is logged in to your store sent a message in the chat. Their account e-mail is used. Administrators are never captured.

An address typed into a form is checked before it is accepted. One address is one lead: if the same person comes back, their existing lead is updated with the latest name, source and cart, and their progress through the e-mail sequence is kept. The cart contents at the time of capture are saved with the lead, so that e-mails can show them.

Work with the lead list

The Leads tab opens with five figures: Total Leads, Active, Purchased, Conversion Rate and Emails Sent. Below, each row shows the e-mail, name, source, cart value, Drip Step (the last sequence e-mail received), Last Email, Next Email, status and creation date.

  • Search by e-mail or name, or filter by status and by source.
  • View opens the conversation the lead came from.
  • Edit lets you correct the name or phone number, change the status, or move the lead to another step of the sequence.
  • Delete removes the lead.
  • Export CSV downloads your leads with their e-mail, name, phone, source, cart value, status, drip step and dates.

A lead has one of three statuses:

  • Active: can receive the e-mail sequence.
  • Purchased: an order was placed with the same billing e-mail. The sequence stops for this lead.
  • Unsubscribed: the customer clicked the unsubscribe link. The sequence stops for this lead.

Set up the e-mail sequence

The Email Sequence tab holds one numbered chain of e-mails, often called a drip. Every new lead starts before step 1 and receives the next enabled step when its delay has passed, one step at a time, until the steps run out, the lead buys or the lead unsubscribes.

Start from the templates

  1. Open the Email Sequence tab and click Install Templates (or Install missing templates if you already have steps).
  2. Confirm. Three ready-made sequences are added, nine e-mails in total: Cart Abandonment, Welcome and Win-Back.
  3. Open each step you want to use, rewrite it for your store, and switch it on with the toggle on its card.

Every installed step arrives switched off, so nothing is sent until you activate it. The steps are numbered one after another in a single chain, which means a lead moves through all the steps you leave enabled, in order. Enable only the ones that make sense as one series. Some template steps mention placeholder coupon codes (COMEBACK10, WELCOME15, WELCOMEBACK20 and LASTCALL30): create those coupons in WooCommerce → Coupons or replace them with codes of your own before you activate those steps.

Restore default templates deletes every step, including the ones you edited, and reinstalls the originals. It cannot be undone.

Add or edit a step

  1. Click + Add Step, or edit an existing step.
  2. Set the Step Number and the Delay (hours after previous).
  3. Write the Subject Line and the Email Body. The body accepts HTML. Click a placeholder tag to insert it, for example {first_name}, {cart_items_cards}, {cart_total}, {cart_url}, {store_name}, {discount} or {unsubscribe}.
  4. Optionally enter a Discount Code (optional): an existing WooCommerce coupon, shown where you put {discount}.
  5. Tick Enabled and click Save Step.

You can drag the cards to reorder the steps, and Duplicate creates a switched-off copy of a step. Each card shows a Sent counter.

How delays work

  • The delay of the first enabled step counts from the moment the lead is captured. The delay of each later step counts from the moment the previous e-mail was sent.
  • Delays are in hours and accept decimals: 0.25 is 15 minutes, 24 is one day, 72 is three days.
  • The plugin checks for due e-mails every 15 minutes, so an e-mail can leave a few minutes after its delay has passed. Run Queue Now processes due e-mails immediately.
  • Switching a step off does not remove leads from the sequence; that step is simply not sent.
  • If a step uses {cart_items} and a lead has no saved cart, or if sending fails, that lead is paused: its Next Email is emptied instead of the e-mail being skipped silently.

Switch the sequence on

  1. Open the Settings tab.
  2. Turn on Enable Lead Collection & Drip Emails.

While this switch is off, no sequence e-mail is sent even if steps are enabled, and the Leads tab shows the banner “Drip emails are currently paused.”

Send post-purchase and review-request e-mails

The Post-Purchase tab follows up on orders, whether or not the customer ever used the chat. It needs WooCommerce. When an order is marked Completed, up to two e-mails are scheduled for that customer:

  • A review request, which shows the products from the order with a button to review each one.
  • A cross-sell e-mail, optional, which recommends related products and leaves out what the customer already bought.
  1. Turn on Enable Post-Purchase Emails.
  2. Set Review Request Delay (days after delivery): the number of days after the order is completed, from 1 to 30. The default is 3.
  3. Decide whether to keep Cross-Sell Email on, and set Cross-Sell Delay (additional days after review email). The default is 5, so the cross-sell leaves about 8 days after completion.
  4. Optionally write a Custom Review Request Subject and a Custom Cross-Sell Subject. You can use {name}, {first_name} and {store}. Leave them empty to keep the default subjects.
  5. Click Save Settings.

Only orders completed after you switch this on are followed up. The tiles at the top count Reviews Sent, Cross-Sells Sent, e-mails In Queue and Failed Sends, and Queue Inspection lists the last 50 scheduled e-mails with their status.

Set the sender

On the Settings tab, From Name and From Email are what customers see in their inbox, for both systems. Use an address on your own domain: the screen warns you if you enter a free mailbox address such as a Gmail or Outlook one, because e-mails sent from your site in that name tend to be rejected or filed as spam. The same tab tells you whether an SMTP plugin was detected on your site.

How unsubscribing works

Every sequence e-mail has an unsubscribe link in its footer, and you can place one in the body with {unsubscribe}. When a customer clicks it, they see a confirmation page, their lead becomes Unsubscribed and no further sequence e-mail is sent to that address. The link keeps working even if your Pro licence has ended.

  • If an unsubscribed customer later gives you their address again through a chat form, the lead becomes Active again and the sequence restarts from the beginning.
  • You can set a lead to Unsubscribed, or back to Active, yourself with Edit on the Leads tab.
  • Post-purchase e-mails carry their own Unsubscribe from follow-up emails link, kept on a separate list from the lead statuses.

Send yourself a test e-mail

To test a step of the sequence:

  1. On the Email Sequence tab, click Preview on the step to see it with sample data without sending anything.
  2. Click Send Test on the same card.
  3. Enter the address that should receive it and confirm. If you leave it as it is, the test goes to the site administrator’s address.

The test uses a sample customer and, when your store has products, a real product from your catalogue, so you can check the product cards. The step needs a subject and a body, but it does not need to be enabled.

To test the post-purchase e-mails:

  1. On the Post-Purchase tab, go to Test & Preview.
  2. Click Send Test Review Email or Send Test Cross-Sell Email and enter a recipient.

Preview Review HTML and Preview Cross-Sell HTML show the same e-mails on screen without sending them.

If a test never arrives, open the Settings tab and click Test Deliverability. It sends a real e-mail with the From Name and From Email currently in the form, saved or not, and reports what happened. The System Health card at the top of the screen runs further checks, including whether the scheduled task that sends e-mails is running.

Still stuck?

Check the troubleshooting guide, or contact support and tell us what you tried.